Last updated on October 6th, 2024
Having a noisy radiator is annoying and sometimes unbearable. From clicking and banging to water flow, a noisy radiator can be fixed in most cases. The first thing you should do is bleed all of your radiators and repressurise the boiler to make sure all the air is out of your central heating system.
This is the easiest thing to rule out, as air in your system is potentially causing your noisy radiator. I have been replacing and repairing radiators for over a decade and have fixed my fair share of noisy radiator problems.
Noisy Pipes
If you have noisy radiator pipes, then fixing them down more securely with pipe clips might fix the problem. A lot of noisy radiator pipe calls I attend are normally caused by loose copper pipes that have not been fixed down correctly, if at all.
Fixing the pipes down with pipe clips will make them more solid and the water will flow through more smoothly. It could also stop potentially damaging loose pipes in the future.
Noisy Valve
A noisy radiator valve can be caused by having incorrect valves on the flow and return. Modern radiator valves are mostly bidirectional nowadays, so it’s rarely a problem, but old thermostatic radiator valves had to be on the flow side of the radiator.
Another reason could be a faulty or broken valve. If this is the case, you will need to replace the radiator valve.
Noisy After Bleeding
Having a noisy radiator after bleeding all the radiators means that air in the system was not causing the noise problems. This is one of the easiest things to rule out, as most people have a radiator bleed key.
Make sure to repressurise the boiler after bleeding any air out of any radiators, as this will cause the pressure to drop.
Limescale build-up inside your central heating system and radiators could be causing noises too. You will need to flush your system to fix this problem and might need to power flush it.
Noisy Running Water
In my experience, whenever there is a noisy radiator with running water or dripping noise, it is normally caused by a radiator being fitted the wrong way around. For most new radiators it does not matter which way round it is fitted, but with some modern tall radiators, the flow and return have to be fitted on certain sides.
If they are fitted on the wrong side you might have problems with it not heating up properly or noise problems.
If your radiator has just been fitted, then this is the first thing you should be looking to rule out. If this is the case you will need to remove the radiator from the wall and flip it around if it’s a tall double, if not you’ll have to swap the pipes around.
Noisy Clicking
A clicking sound is probably the most common noisy radiator sound, this is normally caused by the metal expanding when the heating is turned on. This can also happen when the metal is contracting when the heating is turned off and the water in the pipes is cooling down.
There is not much you can do about this problem apart from replacing sections of the troublesome pipework. Replacing copper pipes with plastic pipes could be the answer. This will be very expensive, and you might end up replacing the full system’s pipes.
Noisy When Heating Comes on
A noisy radiator when the heating comes on is normally caused by the metal (copper) expanding because of the heat from the water. This should stop when the heating has reached its set temperature, as the metal will have stopped expanding.
If this is a big issue for you, then you will probably have to replace some pipework to stop it from happening. Plastic pipe is very common now on heating systems, so replacing it with plastic pipe will fix this problem.
Noisy When Heating is Off
A noisy radiator when the heating is turned off will be caused by the copper pipes cooling down and contracting. This should stop after the system has cooled down.
Feel free to ask any questions in the comments below, and I’ll do my best to help. If you found this post helpful, please consider sharing it.
