Last updated on October 12th, 2024
An Ideal boiler leaking water can cause your boiler to not fire up, rust or become dangerous. I have been fitting and fixing boilers full-time for over a decade and have repaired many leaking Ideal boilers. In this post, I’ll share some of what I have learned over the years from my on-the-job experiences.
Why is My Boiler Leaking Water From Underneath?
There are many places a boiler can leak water from, but it’s almost always leaking from underneath.
Leaking from underneath doesn’t mean the leak is at the bottom of the boiler though. The leak could be at the top of the boiler inside but collects in the bottom of the boiler before dripping out underneath.
The best way to find out where leaks are coming from is to keep checking as high as possible to look for signs of water because where it’s dripping from is not usually where it’s leaking from.
The most common leaks on Ideal boilers I come across are from the sump which will need to be replaced
Ideal Boiler Pipe Leaking
When you have an Ideal boiler pipe leaking water you will need to do one of these things:
- Tighten the nut if it’s on a compression fitting
- Resolder the fitting
- Replace the section of pipe
- Solder a patch fitting on
Ideal Boiler Leaking Water From Overflow Pipe
A boiler leaking water outside means the pressure relief valve is leaking out of the blow-off or overflow pipe.
The pressure relief valve leaking is usually a sign of other problems causing it to leak but it often means you will need to replace the pressure relief valve. You should find and fix any other problems before replacing it or it will just leak again.
Ideal Boiler Condensate Pipe Leaking
A condensate pipe leaking out of the end outside is normal but if it’s leaking from a fitting inside the house then this could potentially be dangerous.
A frozen boiler condensate pipe can cause it to leak sometimes but condensate water is acidic and eats away at copper and brass which is why they have to be plastic. If a condensate pipe leaks onto a copper pipe, especially gas, this should be fixed as soon as possible.
Ideal Boiler Filling Loop Leaking
A filling loop leaking usually means it needs to be replaced. You can tighten the nuts up if it’s leaking from them but you will probably need to replace the boiler filling loop or filling loop valve.
Ideal Boiler Flue Leaking Water
An Ideal boiler flue leaking water is typically a sign it’s not fitted correctly. A condensing boiler creates condensate wastewater which is created from the flue gases. This wastewater needs to run back into the boiler condensate trap via the flue which is why the flue needs to be pointing slightly up and away from the boiler.
If the flue is pointing slightly down (or even straight), the condensate will drip out of the end of the terminal outside. If it is leaking from anywhere else, e.g. a flue connection, this will need to be looked at and fixed by a gas engineer as soon as possible.
Ideal boiler guides
Ideal Boiler Leaking Gas
If you can smell gas coming from your boiler then you will probably have a boiler gas leak which needs to be fixed ASAP!
You should turn off the gas at the gas meter if you can, and call your local Gas Safe registered engineer to book an appointment or call the National Gas Emergency Service on 0800 111 999.
Summary
An old Ideal boiler leaking water may be a sign the boiler is on its way out and needs to be replaced soon. Leaking brown water typically means you have a dirty heating system which is causing problems and is a sign you need to flush the heating system after fixing the leak.
If you have a boiler leaking from any type of compression connections, e.g. a boiler valve on the flow or return, or a boiler drain valve, you should try tightening the nuts with an adjustable spanner.
Feel free to ask any questions in the comments below, and I’ll do my best to help. If you found this post helpful, please consider sharing it.
Hi Steve,
I have a first floor maisonette with a garden that I really would like a tap for, what should I use as I will have to run the pipe down the outside wall from my bathroom fittings (unless there is an ingenious way to run it down the cavity wall and then out..?).
Thank you
Hi Maz,
You’ll just have to use copper pipe and insulate it with some pipe insulation. Make sure you fit an isolating valve inside so you can isolate the water supply and open the tap to let the water out. This will stop it from freezing and damaging the pipe or fittings in the winter.
Thank you for replying Steven, I’ll look to do that
Sorry it posted on the boiler thread!…♀️
Maz.